Marble is a special and elegant natural stone that is unique to the owner since no two pieces of marble are the same. Marble will display its beautiful colors and veins throughout many years, but the time will come when the marble is in need of a good polish. Marble is very durable, but stains, scratches, dullness, and even cracks may start appearing depending on the foot traffic which will drastically reduce its appeal. Whatever the case may be, professionals can polish the marble and bring back its vibrant color and shine through various polishing techniques. Even though you can polish marble yourself, professionals will almost always yield better results and have a much lower chance of accidents due to their experience. The first thing they usually do is move all the furniture and make sure nothing covers the marble. From this point, the marble is cleaned with a cleaner so no dirt or dust mixes and interferes with the later process. If your marble has any coatings, a stripper compound will be used to remove it so the craftsman can work on the actual surface.
Once the stripper has been applied successfully, more cleaner solution is applied and swept with a clean mop to get rid of the dissolved wax. If damages such as stains and etchings were superficial, then it may have been removed with the stripper. If not, the damage is on the marble itself and further steps need to take place. If it is a stain, professionals will identify what type of substance caused the stain and match it with the correspondent poultice. A poultice is simply a mixture of substances such as hydrogen peroxide and baking soda that is used to remove stains. For scratches, a sponge with baking soda is gently but consistently buffed in the affected area until the scratches disappear. If the scratch marks are even deeper, they may have to use polishing powder with an electronic grinder to grind and buff the area until the scratches are gone. When they get to actually polishing the marble, professionals will wet the floor thoroughly with a hose and use an electric grinder with diamond grit disks. Sometimes, companies will choose to weigh the machine down and apply more pressure and pass over the terrazzo in rows about five times at about thirty grit.
From there, more water applied they grind the floor again but this time with finer grit. After this is done, they may cut out any damages and fill any holes your marble may have with the marble that closely matches your marble through color, texture, and veins. If the holes are too small, they sometimes make them bigger with a chipping tool since they will be filled and smoothed out anyway. Once the mixture hardens, a grinder is used to smooth out the patch until it is thoroughly blended in. From there, they continue to grind the floor and with each pass use finer and finer grits until the finest grit is achieved while removing weight if it was added to the machine. All that’s left is adding polishing powder specifically for marble and a wet polisher around ten times per row. A sealer or wax is then applied towards the end and is buffed out with an electronic buffer. By now, you should have a professionally polished and sparkling marble that looks several years younger and will continue to do so for many years to come through professional marble polishing.
Marble Polishing Experts Fort Lauderdale
Marble Polishing Tips Fort Lauderdale
Marble Polishing Process Fort Lauderdale
Marble Polishing Near me
We also Provided Service at: Coral Springs,Deerfield Beach,Fort Lauderdale,Hollywood,Miramar,Pembroke Pines,Pompano Beach,Sunrise,Weston